The
concept of concrete polishing is very similar to wood sanding: bring
shine to newly installed concrete floors or rejuvenate existing installations
that are dusty, worn, pitted and otherwise suffering from years of
use and abuse.
Marble
Restoration Services® Ltd. in association
with L&M
Construction Chemicals enhanced this concept
by offering industrial polishing system of concrete floors called
FGS
Permashine™
FGS
Permashine™ restoration system of concrete floors
goes through three main stages:
1.
Grinding the floor using HTC
diamond refinishers. Working heads equipped with
progressively finer grits of special segments gradually grind down
surfaces to the desired degree of shine and smoothness.
The process of concrete polishing is carried out in technically
advanced "water-free" and "dust-free" environment
where any airborne dust is collected by HTC
dust extractors eliminating up to 99.96% dust of
0.3 microns.
2.
Floor coloring using solvent based translucent penetrating dye concentrates
or acid stains to create a range of affects from subtle earth tones
to vibrant hues.
Marble Restoration Services® Ltd.
can offer a wide selection of decorative colors which correspond
to architectural concepts and compliment the designer' choice.
Color
chart
3.
Sealing the floor with FGS hardener specially formulated concrete
densifier to increase the wear resistance and surface strength of
concrete. Densifier deeply penetrates into the stone matrix providing
waterproofing, dust resistance and increased hardness.
FGS
hardener passed Static Coefficient of Friction (SCOF) at The National
Floor Safety Institute and is fully complying with requirements
of Canadian Food Inspection Agency.
Certificate - Click
here.
FGS
Permashine™
floors last longer than conventional concrete floors, cost less
and a better looking alternative versus old-fashioned waxing, vinyl
or urethane paint.
The reasons are proved
and the following:
 Polished
concrete is harder than any other floor finishes
Treated surface protects
against oil spillage and contaminants
Resists tire marks
from cars and trucks
Surface is 50 % more
abrasion resistant than untreated concrete
Dramatic visual appearance
with great reflection
Minimal maintenance
cost
Long restoration
cycle - average of 8 to 12 years / industrial and 25 to
40 years / residential
|
Concrete polishing
system FGS
Permashine™
is recommended for commercial and retail stores, industrial areas,
offices, manufacturing plants, car dealerships, warehouses and any
other dust sensitive areas like food processing plants, restaurants,
airports, hospitals and many other places.
Residential
customers enjoy practical beauty and everlasting durability of in-house
polished concrete floors in living rooms, bathrooms, garages, basements
or any other home areas designing concept will usher to.
|
