Blastrac Concrete Shot Blasting- Ottawa, Kingston, Montreal
Blastrac systems are the preferred method for surface preparation used by professional contractors and recommended by coating manufacturers for a wide range of applications. Proper surface preparation
provides a dry, even and level surface free of dirt, dust, oil and
grease. Removal of surface contaminants allows primers and repair
materials to have direct contact with the substrate, increasing
the surface area and roughness of the surface, and providing increased
anchorage of the applied material.
Removal of Epoxy, Mastic, Paint & Adhesives
Floor Polishing & Sealing quickly and effectively removes
different topical applications: epoxy, mastic, paint, glue,
plaster, adhesive and many others using self-propelled
Blastrac shot blasting
machines which provide up to 1,300 FT2 of blasted concrete for each
Blastrac walk behind shot blasting machines use a high performance,
airless centrifugal wheel for propelling blast media at a high velocity
in a controlled pattern and direction. Ride-on systems use a paddle
wheel configuration. In both types metal abrasive thrown by the
rotating blast wheel is accelerated towards the concrete surface.
The media strikes the concrete and rebounds along with removed contaminants
into a recovery chamber or separator. The dust collector removes
pulverized abrasive, dust, and contaminants. Very little abrasive
is lost and the usable media is returned to the storage hopper for
recirculation by the blast wheel.
Blastrac is an Environmental Friendly Solution
technologically-advanced floor preparation systems respects the
environment. Blastrac products are environmentally friendly and provide the most economic solutions to your surface preparation projects. Our systems provide reduced pollutants at the job site, reduced noise and allow for multiple tasks to occur at the same time.